How to Find Ethernet Password on Windows 10

What is Ethernet?

Ethernet has been around for quite some time now! Having first being used in the early 1990s, this is a process that allows different computer networks together in a LAN or Local Area Network.

This of course allows for seamless data transference between two or more computers at the same time using cables and has been one of the most popular and used methods since it was first introduced.

How to find Ethernet password on Windows 10

Now that we have all of this information out of the way, let’s look at how to use this to get your password for Ethernet on Windows 10 devices. There are two most popular ways to find the password for most networks on Windows. The one we will be looking into is called the WPA2-Personal and the other one is called WPA2-Enterprise.

If you are using your Windows 10 device on your home network, we recommend employing the WPA2-Personal method. This is because it is easier to find the password for home users. After all, the method is simpler as well. To make matters even simpler, you will find it is best to keep a wired Ethernet network router connected to a wireless router!

This is because while you might have trouble accessing your wired network password and other router information, accessing or changing your wireless router’s password will be much easier! This can be accomplished by altering the configuration of your router.

For this, it doesn’t matter if you have Windows 10 or any other Windows version. You can usually get to this information via your configuration home page. However, keep in mind that this configuration will be dependent on your router’s specifications given to it by the brand as it has been manufactured.

To make all of this a little easier for you to understand, we are going to give you a step-by-step guide on how to find your Ethernet password on your Windows 10 device. The only thing you need to keep in mind is that your device must be connected to your network connection via an Ethernet network. If you are using a Wi-Fi network make sure it is also connected to your laptop, PC, or smartphone.

Now, without further ado, here are the main steps to find your router’s password!

  1. The first step to find your Ethernet password is to locate the wireless router’s IP address. These will usually be in a 192.168.0.1 format so that’s what you should be looking for. To find this router information, you can either go through your router’s documents or if you don’t have those available, go through the following steps:
  2. For Windows 10, you can find this router information by typing cmd in the Command prompt that pops up. This is case sensitive so do not type it any differently. This will be accomplished by typing this in the taskbar.
  3. Once the prompt has appeared, you can then type in ipconfig and click on Enter This is also case sensitive so either copy, paste it or type in all lower caps.
  4. You will get a list of results. Go through them to find the option that reads, Ethernet adapter Local Area Connection. This is of course the method for when you have access to an Ethernet network connection.

This is also where you can type in Wireless LAN adapter Wireless Network Connection. However, this is for when you are connected to a Wi-Fi network and you wish to see that router’s IP address instead.

All of this has been to figure out exactly what your router is called and what its address is! Once you know this, it becomes super convenient to get to the password. On Windows 10, the next step is to type this router address into your Chrome or Firefox web browser and press enter.

Once this is accomplished, a pop-up menu will appear that will ask for both password and username of the Ethernet router. In case you know them, they can now be added. However, since this is a guide on how to find the password, the next step is to add in the factory default username and password. These can be found in the documentation of your router!

Of course, if you do not have this information as well, the easiest way is to reset them to factory defaults. This is usually a method that is used if the router’s password has been manually changed. This automatic resetting can be accessed by pressing down the hardware reset button on your Ethernet router.

Try to do this for more than 5 seconds when it is turning on. This will automatically ensure that your factory default password settings are back as default.

There is another way to find the router’s password for Windows 10.

  • The first step is to your Windows Start Then click on Settings, then Network and Internet. Of course, you can always directly click on the icon for the wireless connections in the taskbar on the right-hand side. This is a direct way and will also get you to the option that says Network and Internet Settings.

  • Make sure that the adapter for wireless connections is switched on. Then you can locate and access the wireless network connections.
  • In the same window for Settings, you will also see an option that reads, Status. Once you have clicked on this, you will then get to the Network and Sharing Center.

  • Next, you will be in the Network and Sharing Center window. Here you should select the option for Wireless Network Connection. This will be on the right side of Connections. You may click on it to access the next step.

  • When you are in the Wireless Network Connection Status window, the next step is to press on the option that reads Wireless Properties. Then click on the option that reads, Security, and this will appear in the Wireless Network Properties dialog window.

  • Finally, you can easily select the Show Characters option that will come up next and you will get the password for your network connection. That is the end of the steps to find your Ethernet password and router information.

With that, we have reached the end of our elaborate and fully comprehensive informational guide on how to find Ethernet router password on your Windows 10 device. While it might seem a little technical at first, we have laid it out for you in a simple and step-by-step format.

What Is the Difference Between Ethernet and WI-FI?

The first and foremost different between a Wireless connection or Wi-Fi connection and an Ethernet connection is that Ethernet networks make use of cables to transfer data while Wi-Fi networks will transmit it with the aid of wireless signals.

Of course, the Ethernet network connection is still extremely popular today because while wireless signals may falter, the cables on the Ethernet ensure that your connection remains stable at all times. However, the good thing about Wi-Fi is that you get unlimited mobility since no wires are weighing you down.

Alternatively, with an Ethernet connection to be connected to an internet network, you will certainly need cables and so it has limited access. However, these cabled networks are, as we mentioned before, more stable and thus even faster at times.

Do You Need an Ethernet Password?

No matter what Windows version you are using, your Ethernet network connection will always be safer than a wireless network. Of course, this is because your wireless connection has your data traveling via signals in the air and these can be caught.

On the other hand, with Ethernet, you will only have to worry about people physically accessing your private data. However, this does not mean that you shouldn’t have a password set for your Ethernet connection. Your password will be an added layer of necessary protection in case someone gets access to your wired network.

This will hopefully enable you to easily apply these steps and do the procedure yourself without the aid of any professional or expert help. Finding this router information is now easily accessible to all users and we hope that this guide has been informative and insightful to our readers!

Leave a Comment